• Categories:Company information
• Author:
• Origin:
• Time of issue:2013-11-09 15:45
• Views:6

(Summary description)Before the stepper motor is powered on, check the following steps:
1) Whether the power supply voltage is suitable (overvoltage is likely to cause damage to the drive module); to the +/- polarity of the DC input must not be connected incorrectly, and whether the stepper motor model or current setting value on the drive controller is suitable (at the begining do not to be too big);
2) The control signal line is firmly connected, and the industrial site should preferably consider the shielding problem (such as using twisted pair);
3) Do not connect the wires that need to be connected when starting. Only connect to the most basic system. After running well, connect them step by step.
4) Be sure to find out the grounding method, or use the floating.
5) Closely observe the state of the motor within half an hour of starting operation, such as whether the motion is normal, sound and temperature rise, and immediately stop and adjustment after discovering the problem.